Seamaster Higlos, Silk Pro Interior 5L 5/12 Cat Dalam Kilat boleh Lap, harga berpatutan,boleh cover hairline crack

Seamaster Silk Pro Easy Wash Finish brings your interior to life with satin finishing. Silk Pro is washable, has good adhesion and resists alkaline and unwanted fungi well. As you slip into your silk pyjamas, your interior goes to sleep wrapped in satin walls. Breathe through the night peacefully amongst your walls that has low odour and is free from harmful chemicals.

Product Features

• Low VOC

• Fungus resistance

• APEO & Formaldehyde free product

Higlos

Seamaster Higlos Luxury Silky Wall Finish is a superior quality emulsion paint specially formulated for give your interior a shiny makeover. Higlos provides a smooth and glossy finish to your walls and is resistant to stains. But if you do spot a stain, give it a wash and a scrub and they will be back to their shiny self. Don’t worry, they are scrub resistant too. Free from harmful chemicals and with low odour, breathe easier as you enjoy your new ambiance.

Product Features

• Glossy finish

• Cover hairline cracks

• Easy application and excellent hiding power

• Smoother finish

USES

As a Specially formulated for protection and decoration of interior masonry and other surfaces such as plaster wall, cement, gypsum board, brickwork, hard and soft boards and on appropriately primed wood surfaces.

SURFACE PREPARATION

New Masonry Surface:

It is crucial that ample time is allowed for the concrete /plaster surfaces to dry out. High moisture content is a common cause for premature paint failures, such as blistering, discoloration, etc. Concrete/plaster are alkaline in nature and together with the presence of salts and moisture may cause paint systems to fail prematurely. Masonry surfaces must be reasonably dry and free from oil / grease and other contaminants before an appropriate alkali resistance sealer is applied.

Old Unpainted/previously Painted Masonry Surface:

Surface must be dry and free from any structural damaged and cracks.Wash the surface to remove any stains, debris and powderiness before application with Seamaster Silk Pro Easy Wash Finish (7500G).

Method of Application

Brush, roller or spray

Product Preparation

Ready for use after thoroughly stirring. However, if thinning is required, not more than 5 % of water may be added for the first coat. For best result,thinning is not recommended for the subsequent coats.

Product Application:

Touch dry : ≤ 30min

Hard dry : ≤ 1 hour

Recoating Interval : 3 hours

Therotical Coverage : 11-13 m²/litre

Application : Brush, roller or spray

STORAGE CONDITION

Air tight, store in dry and cool condition.

COLOUR DISCLAIMER: