Product description
KANSAI CROWN Emulsion is a MATT emulsion specially formulated for housing projects where economy is important. It smooth matt finish hides surface imperfections and avoid reflection of uneven plastered surfaces.
For use on new or previously painted interior masonry surfaces such as brickwork, plaster, cement rendering and asbestos cement where an economical decorative matt finish is desired.
• Economy – suitable for large-scale housing projects, Good adhesion property, Good hiding power, Easy to apply, Formaldehyde free, Wide colour range, No added lead or mercury, Low VOC and odour. Approved by SIRIM to Malaysian Standard MS 903:1984
Coverage* 10 – 12 m²/Lt @ 25 microns,
Dry Film Thickness 25 microns / coat
Wet Film Thickness 63 microns / coat
Size available: 7 or 18 Liters
Drying Times Surface dry : 20 mins; Recoat : 1 - 2 hours *Depend on temperature and humidity
Dilution Ratio: Brush or Roller, Ready for use. If dilution is required, add up to 5% clean water. Conventional Spray, Dilution up to 10% water.
For new surfaces, allow surfaces to cure and dry out completely. Avoid painting when the moisture content is above 15% on a Protimeter and alkalinity of the wall is still high above pH-9 or premature paint failure will occur. Large cracks must be repaired with cement: sand mix and rendered smooth. Make good all minor defects with appropriate fillers. Remove all loosely adhering residues by thorough brushing.