Product description
KANSAI Fast-1 Acrylic Emulsion is a self-priming water-based acrylic emulsion specially formulated with “Breathe Thru” technology to promote rapid release of moisture from newly plastered walls. Ideal for new renovation and project as KANSAI Fast-1 will speed up painting works where you can paint within 1-3 weeks (moisture content must be
For use on interior and exterior masonry surface such as brickwork, plaster, cement panels and boards. It is suitable for use on both new and previously painted surfaces.
Performance: Quick dry, Moisture – self release, Low VOC & low odour, Save cost & time, No priming, For interior & exterior
Coverage*:10 – 12 m²/Lt @ 25 microns
Dry Film Thickness: 25 microns / coat
Wet Film Thickness: 63 microns / coat
Surface dry : 20 mins ; Recoat : 1 - 2 hours *Depend on temperature and humidity
Allow surfaces to cure and dry out within 1-3 weeks (moisture content must be less than 20%). Large cracks must be repaired with cement; sand mix and rendered smooth. Make good all minor defects with appropriate patching materials. Remove all loosely adhering residues by thorough brushing
Check for powders or chalk. These surface contaminants must be completely removed by washing with warm water and detergent solutions. Rinse with clean water, taking care to change the rinsing water regularly. If after thorough preparation the surface is still slightly powdery, it may be necessary to seal it with PAR Plasterseal solvent-based wall sealer. Dilute the sealer up to 30% and apply liberally to allow the sealer to fully penetrate the surface and form a barrier that seals up the chalk.