SMART PAINT High Gloss Alkyd Enamel Smart-Glo ( 1 Litre )
Suitable For:
1)Wood Surface
2)Metal Surface
*Indoor & Outdoor can Use.*
SMART-GLO High Gloss is a quality alkyd especially developed to withstand the most severe
condition of tropical climate. It is made of non yellowing long oil gloss enamel This alkyd and light-
fastness pigments. enamel has excellent gloss retention and fungus attack. Suitable for the
application on Wood and metal surfaces, both exterior and interior use.
Surface Preparation
The rust, defective or poorly adhere old loose paint film, dirt, grease or wax must be rubbed down
using suitable sandpaper to smoothen the unevenness and dusted off. Prime one coat of Primer for
wood surface or Zinc Chromate Primer for metal surfaces. Follow by one coat of Undercoat for the
build. New galvanized metal, aluminium, stainless steel or alloy, the surface shall be degreased and
prime one coat of Primer.
Application Data
Touch Dry: Less than 1 Hour
Recoat: 3-4 hours
Film Properties: Approximately 40Microns per coat (do not apply too thick in a single coat, split into
more layers)
Coverage: 10-12m²/ litre
No. of Coats: 2 coats
Direction For Use
Application: Stir well before use. Application can be carried out by using brush, roller or spraying.
Thinning: For normal use, Thinning is not necessary. Use Thinner for Dilution.
Cleaning up: Cleaning all equipment with Thinner or White Spirit immediately after use.
CAUTION
-Keep away from sources of ignition. No smoking.
-When applying, it is advisable to wear suitable eye protection. In case of eye contact, rinse
immediately with plenty of water & seek medical advice. Remove splashes from skin; use soap &
water or a recognized skin cleaner.
-Protect from extreme temperatures. Store in a cool place.
-In the event of accident, contain & collect spillage using sand or earth. Do not empty into drains or
watercourses. Dispose any paint waste in accordance with the appropriate environmental Quality
Regulations.