Liquid Silicone Mold Maker AB 1KG (Food Grade) Hardness 5,10,15, ratio 1:1

 

Hardness 5/10/15 (Lower number means softer)

 

1:1 Instruction of use

Testing: Mix A and B components by 20 grams each and stir well to test whether the bubbles can be exhausted within operation time. (Best use vacuum chamber to get rid of bubbles, may put inside fridge to get rid of bubbles if there is no vacuum chamber. )

 

Operation: Stir gently for approximately 5 minute (Do not stir too violently) before pouring.

 

Operation time: Around 20 min at room temperature 25, full curing time 4 hr.

 

 

Cautions:

1. The product is a platinum catalyst, water, impurities, organic tin catalyst, acid, alkali and other organic containing sulfur, phosphorus, nitrogen can affect the curing of the rubber, these substances are not to be mixed or made contact.

 

*NOTE: Due to density, please refer to the weight rather than the scale on the bottle. Weight error of ±30g is inevitable due to machine packing.

 

 

WARNING: The bottles will be randomly dispatched, there may be dents, but it will not affect the content at all.

Please purchase at your own discretions!!!