X'traseal SN-505 Kitchen & Bathroom Sealant

SN-505 kitchen & bathroom sealant is a single component 100% RTV silicone sealant with excellent anti-fungal properties. It resists mildew and suitable for many common areas where under high humidity and temperature conditions may be encountered. It will bond to form a durable, flexible, waterproof seal on most building materials.

 

 

:

Mold & mildew resistant (fungicide)

Neutral, oxime curing system

Non corrosive to metals

Non corrosive to alkaline substrates

Non corrosive to automobiles

Outstanding durability

One part no mixing

Permanently flexible

Excellent gunnability (-20c to 50c)

Waterproof & weatherproof seals

Low shrinkage

No sagging

Primerless adhesion to most materials

 

 

:

General glazing: masonry, concrete, ceramics stone, glass, metals, stainless steel, aluminum, most plastics, wood, brick, zinc, galvanized iron.

General sealing: kitchen & bathroom fittings, sanitary, cold storage, clean room, containers, automobiles, rain water goods, roofing, joints in building and civil engineering.

DIY applications: gutter, air-conditioning, sanitary, car, boat and other marine industry uses.

 

:

Not recommended for aquarium.

SN-505 kitchen & bathroom is a neutral (oxime) curing fungicide silicone. As with other silicone sealants, it is

Not for: traffic areas or areas subject to abrasion.

Not for: paints coating.

Not for: poly-carbonate or polyacrylate if they under tension.

Not for: copper materials.

 

:

Surface must be clean and dry.

Mask smooth surface to simplify clean up.

Use approved back-up material in joint.

Cut nozzle to desired size.

Insert cartridge into caulking gun.

Push sealant ahead for uniform bead.

Tool within 5 minutes.

Clean off excess sealant with M.E.K. Or toluene.

 

:

SN-505 kitchen & bathroom sealant will tack free in approximately 15 minutes and will cure to a depth of 10mm in 7 days. Longer curing time may be necessary in dry and low humidity area.

 

:

Curing system - Neutral (oxime)

Appearance - Non-sagging paste

Odour - Low oxime smell

Specific gravity - 1.01 ± 0.03

Shore a hardness - 30 approx.

Elongation - 400%

Tensile strength - 1.20mpa approx.

Tack free time - Within 15 minutes

Application temp. - 20c to 50c

Service temp. -50c to 150c

Shelf life 12 months

 

:

Material should be stored in a dry and cool place