Product description
SN-503 silicone sealant is one part sealant, high modulus that offer excellent adhesion and weatherability for general glazing and for sealing application.
Neutral, oxime curing system
Non corrosive to alkaline substrates
Non corrosive to automobiles
Excellent gunnability (-20c to 50c)
Primerless adhesion to most materials
General glazing: masonry, concrete, ceramics stone, glass, aluminum, most plastics, wood, brick, zinc, galvanized iron.
General sealing: containers, automobiles, rain water goods, roofing, joints in building and civil engineering.
DIY applications: gutter, air-conditioning, sanitary, car, boat and other marine industry uses.
Electronics sealing: as sealants in the electrical and electronics industry.
SN-503 is a neutral (oxime) curing silicone. As with other silicone sealants, it is
Not for: traffic areas or areas subject to abrasion.
Not for: poly-carbonate or polyacrylate if they under tension.
Not for: copper materials.
Surface must be clean and dry.
Mask smooth surface to simplify clean up.
Use approved back-up material in joint.
Cut nozzle to desired size.
Insert cartridge into caulking gun.
Push sealant ahead for uniform bead.
Clean off excess sealant with M.E.K. Or toluene.
SN-503will tack free in approximately 15 minutes and will cure to a depth of 10mm in 7 days.
Longer curing time may be necessary in dry and low humidity area.
Curing system - Neutral (oxime)
Appearance - Non-sagging paste
Specific gravity - 1.40 ± 0.05
Shore a hardness - 42 approx.
Elongation - 250% approx.
Tensile strength - 1.40mpa approx.
Tack free time - Within 15 minutes
Application temp. - -20c to 50c
Service temp. - -50c to 150c
Material should be stored in a dry and cool place