12V/24V Car Battery Charger Motorcycle Van Maintenance Charging Pengecas Bateri Kereta Pulse Repair Charging

*All items TESTED Before Ship with Proof of Good Quality

⚠️If you receive damaged/unusable and other quality problems, you can contact us directly, and we can provide you with a replacement or return refund service.

Generally, the appropriate charger is selected according to the charging current of 1/10 times. For example, the 12V100Ah battery uses a 10A charger, and so on. The 12V60Ah battery uses a 6A charger. The charging time takes about 10-12 hours. If the charging current is greater, charge it. The time will be shortened, but long-term use will affect the battery life, so please choose the appropriate charger according to your battery model.

This is a automatically car battery charger which can charing the battery based on battery's condition! It uses the MCU controller for save & fast charging service for your battery!

Constant current mode:

When the voltage of the battery is lower than the value set by the charger, the charger will work under the constant current mode and supply the constant current for the battery.

Constant voltage mode:

Using the pulse width modulation(PWM) tech to control the charging current and output voltage of the charger which ensures the battery is fully charged and avoids over charging.

Floating charge mode:

When the voltage of the battery is approaching the value of the constant voltage mode, and the current will cut down to the given current gradually, that means the battery power is full, then the pilot lamp will turn green and the fan will stop working. The charger will turn the mode into floating charge mode automatically. At this moment, the battery can be stopped charging or keep on floating charge for half an hour.

Specification of SON-1206D:

Materials: Plastic + Metal

Battery Type: storage battery AC input

Applicable battery: 12Ah-100Ah

Charger Current:6A

Input Voltage:150V-250V

Output Voltage:12V

Rated Frequency:47-63HZ

Charger Mode:Three-phase(PWM charging mode)-Includes constant current charging phase, constant voltage charging phase,floating charging phase.

Full load efficiency:≥ 87%

Working Temperature:-40~+95C

Feature

* Evaporation function

* Automatic Trickle function

* Anti-anti-charging function

* Anti overvoltage overcharge function-This battery charger can automatically stop charging when it is getting fully charged.

* Power and energy

* Short circuit protection

* Short circuit protection

* Short start function overcharge

* Wide voltage range