About this product
- Kuasa (W):80
- Tempoh Waranti:1 Bulan
- Voltan Input (V):220
- Jenis Waranti:Waranti Pembekal
Product description
It can operate by one hand, you don't need to point your tin wire and tin gun with all your hands again
and you won't burn your hands accidentally any more. The soldering wire stand ensures the hands-free solder supply during soldering.
Soldering iron heat up very quickly(thermostat range 180 Β°c - 520 Β°c), which has a longer service life and heating fast.
γSoldering Gun Unique Featureγ
Natural mica heating core, heating up fast, long life, can be replaced, easily assembled and dismantled.
Soldering tools can meet your daily work and hobby requirements, such as: As an electrical repair,
for home improvement and other soldering projects.
1. Press down the tin inlet and insert the solder wire from the tin inlet without pulling the trigger until the tin wire is sent to the tin outlet.
2. Connect the solder gun to the power supply, turn on the power switch and preheat.
3. when the solder gun is heated to enough heat, pull the trigger to start the welding operation.
4. to withdraw the tin wire, press the tin inlet and pull out the tin wire at the same time.
5. To replace the heating core, first remove the window, remove the connecting wire of the heating core,
and then remove the soldering iron tip, then the heating core can be replaced.
- The temperature of the soldering iron tip and the soldering iron steel pipe is as high as 480-600 degrees, and the human body should not touch it.
- When the solder gun is working. It is recommended to use a special soldering iron stand to prevent scalding and safety.
- It is forbidden to use solder gun in a dump place, and it is forbidden to put it in a place where children can get it.
- It is forbidden to put the solder gun in flammable and explosive situations.
- Please do not repair or disassemble the solder gun without authorization. If parts or wires are damaged,
only those who are qualified to maintain electrical and electrical products can repair them.
- When the work is completed, turn off the power of the solder gun and wait until it is completely cooled to the room temperature before it can be restored.
Material : Alloy tip + ABS strong plastic
Working Temperature : 180-520 Degrees Celsius
Voltage : 220V/110V , 50HZ
Rated with a diameter of 0.8-1.2mm tin line.
Soldering Iron Tip : 900M Series
Warm-up time : 2-4 minutes
1. Please allow 0-3mm error due to manual measurement.
2. Due to the different display and different light, the picture may not reflect the actual colour of the item.
1 x Soldering Gun (Refer to Option)