Digital Control Electric Filling Machine Semi Auto Liquid Filling 5-3500ml

-Automatic counting function, effectively control filling quantity

-Import single-chip microcomputer control, high efficiency, low power consumption

-LCD display, touch screen is very easy to operate

-Filling Accuracy is high, precise volume

-Wide Voltage range

-Working performance is stable and can be used for long time

-Self-suck function, don't need to pour

-The pump can stand for PH value within 5-8

-Anti-dripping design

-Reasonable design, made of stainless steel, meet GMP requirement

-Speed Parameter Range: 1-9, Filling Time Range: 0.01-99.99s, Interval time Range: 0.01-99.99s

-Save up to 6 sets of parameters for different-sized bottles and can choose from easily

-Widely used in medical, chemistry, food, beverage, oil, and cosmetics, etc.

-Suitable for filling low-viscous liquid without pellets

-The pump can stand oil, heat, weak acid, weak alkali, abrasion and chemical products

-Integrates the advantage of self-suck pump and chemical pump

-heat protect, stable working and continuous idle or load operate for long time

Parameter

Voltage: 220V-260V

Power: 30W

Max Flow Rate: 3.5 L/min

Max Suck Distance: 2m

Repeat Error: ±1%

Machine Weight: 3.5 kg

Filling Volume Range: 5 - 3500 ml

Anti-dripping Function: Available

Memory Function without Electricity: Available

Machine Size: 310 X 260 X 200(mm)

Diameter of Filling Nozzle:Φ 8 mm (*4mm optional)

Suitable Soft Tube:17#(diameter: 6.4mm, thickness: 1.6mm, max pressure0.24Mp)

Note: Different liquid needs to choose different material of tube. The tube provided by us is silicone tube.

Liquid unsuitable: very thick liquid (sauce, detergent), or liquid containing small particles.

The tubes are made of silicone and the pump head is made of PVC plastic material so it can endure mild acid/alkaline solutions. The machine has a control front panel and digital display. You can easily enter your parameters by pressing the buttons on the control panel and the parameters will show in the LCD screen. The filling volume can be controlled via the filling time and speed parameters which give you much flexibility.

Installation

Take the plastic filling nozzle out and install it in the feeding tube. Take out the filling-head stand and install it on the left of the machines. Put the filling head in the clip and tighten it by socket wrench.

Connect the pedal switch with machine, and put the tube with filter below the liquid level inside the storage rank. The position of tank should be lower than the machine. Start to test the machine after all is ready.