20W Hot Melt Glue Gun for Hot Melt Glue Sticks

1. This product selects PTC thermistor as heating elements lead to rapid heating rate. Automatic constant temperature avoids temperatures rising again when arrived at expected temperatures which effectively save energy and lengthen service life.

2. The electrical insulation strength of this product is not punctured at 3750V/min, and can work normally at 100V-240V AC power or DC power. It is free from voltage fluctuation, the inner fuse safety makes it more safer.

Product Application

- Toy model, artificial flower, Christmas trees, decoration, metalware, woodware

Usage

1. This series product apply to glue stick 7 - 7.5mm.

2. Insert glue stick into melt gun, preheats for 5-8 minutes, pulls the trigger extrudes melt glue

3. Do not take out glue stick if cannot be used up for one time. The left can be used for next time after preheat 5-8 minutes

Attention

1. Work on DCV 100-240V, 50-60Hz.

2. It is hot melt glue gun, so please select corresponding glue stick.

3. No touch when it is on work on high-temperature. No usage at flammable and explosive occasions.

4. Do not hold up high when it is on work and gun muzzle keeps downwards. Please cut down power if out of work in 15 minutes.

5. It may smoke in first work time due to durable material inner gun. It will disappear after 30 minutes

6. Keep clean at bottom of gun to make sure insert glue stick into gun smoothly.

7. Do not pull out glue stick from bottom of gun

8. Put guns at dry place with good ventilation where kids can not reach.