Epoxy Resin AB Glue gum gam Crystal Ultra Clear Transparent Paint Mold Maker color colour pigment dye warna kaler ab gam

1KG Epoxy Resin AB Glue DIY Epoxy Resin Note: We don't have any label for this product.DO NOT Pour more than 1cm (thickness) each time to avoid crack!Big bottle is A (Resin), small bottle is B (Hardener).This is hard type epoxy resin. Suitable for jewelry, river table, tabletop coating & more. Specification:Gross Weight (included bottle) : 1000g+- (A=750g + B=250g)Net Weight : A resin 705g+- & B hardener 240g+-(Kindly take note that there might have some weight difference on actual product due to filling machine & bottle limitation)Quantity tolerance : +- 10% Type: Hard (Like PVC)Weight Ratio: 3:1 (Resin:Hardener)Volume Ratio (NOT recommended): 2.25:1 (Resin:Hardener)Color: Crystal Clear (Transparent, can add color)Cure Time: 20 hours for 1cm thickness at 25C Note:i) Please leave it 48 hours to achieve fully hardened.ii) Suggest do not mix more than 400g per cup to avoid the resin heat up / unable to stir and mix evenly INSTRUCTIONS :1. Clean your mold and product.2. Mixing Epoxy Resin (A : B in Weight Ratio 3 : 1 ) - Epoxy requires a minimum mass of material for the chemical reaction to occur, ensuring that the material cures properly. We suggest to mix minimum 9 grams of resins (Part A) with 3 grams of hardener (Part B).- Pour 9 grams of Resins (Part A) to 3 grams of Hardener (Part B) into an empty plastic cup (with total reading of 12 grams).- Make sure to mix the 2 part epoxy according to the weight ratio 3 : 1 (Part A : B)- Stir the mixture slowly using stick or mini spoon. This will minimize the possibility of air bubbles forming in the mixture.- Let the mixture sit for 5-10 minutes to allow any air bubbles to rise to the surface.Note: For volume ratio, A : B = 2.25 : 1Example: 22.5ml A mix with 10ml BNOTE: SUGGEST TO ADD IN SLIGHTLY MORE HARDENER (5% EXTRA) IF USE VOLUMETRIC MEASUREMENTS. 3. Pour epoxy resin into mold:- Remove any air bubbles which may have formed during the application. Simply place the toothpick on the bubble and draw it towards the surface.- Once applied, please allow minimum 16 hours for the mixture to be cured.- Be sure to check on it periodically to make sure no air bubbles have formed in your design. COLORING DYE:Specification: 10mlDesign: small bottle mouth, easy to operateAdvantages: easy to disperse, easy to operate, easy to color, high penetration, full color, high concentration, leak-proof packaging