ORIGINAL LCD DISPLAY COMPATIBLE FOR SAMSUNG A13(4G) A135 / A23(4G) A235 / M23(5G) M236 / M33(5G) M336

Kindly read the terms and conditions (T&C) set out below carefully. Please make sure that you understand them before ordering any Products. Our relationship is subject to these Terms & they impose certain responsibilities upon you & they exclude and limit our liability to you in the event of loss or damage. Please note that by ordering any Products, you agree to be bound by these T&C Please DRY TEST the LCD first before proceeding to glue/attach any other part By "Dry Testing", we mean only connecting the digitizer & LCD cables to the motherboard & powering up the device without putting it on the frame Make sure all alphabets can touch/The screen no auto touch/No lagging. Do not install if you are not satisfied with the quality or face any problem with it. No warranty will be given if you have glued the item* No warranty will be given for Scratches on LCD Physical Damaged Inner LCD Cracked Screw Mark on LCD Flex Cable/Connector is broken Traces of glue mark on LCD Cracked on home button/speaker hole The warranty sticker has been peel out 【Self-Investigation】 Why after changing the part but the problem still exists It might be touch ic, if the LCD can't be touched/auto touch display ic, if no display/blank screen backlight ic, if your LCD has certain black spots or light which is dimmer 【Friendly Reminder】 Special skill & techniques required for proper installation No installation instructions will be provided. It is not an easy job for someone who has no experience at all Strongly recommend looking for PROFESSIONAL for replacement. We will not hold responsible for any damages to your mobile phone that may cause during the replacement process Please remove the battery connector before installing to avoid short-circuit Only use glue/adhesive that is specific for handphone spare part. We won't proceed with any warranty if you use the wrong type Please clear all old glue first before proceed to install the LCD If your housing is bent, please change the housing first before proceeding to replace the LCD. Else it might break easily