OTTERGEL Wiping Wood Stain - Pastel Wood Colour Collections 1/3 Quart / 1 Quart

• Very easy to apply, skilled labour

not required

• Dry in two hours and good colour retention

•No sealer, mixing or special tools required

•No lap marks, drips, streaking

and peeling problem

• Very easy to revive or refurnish old furniture

• Solvent Based

Key Features:

Easy to apply, rub, and clean with lint-free cloth, brush or sponge

No skilled labour required

No grain raising, no dripping, no wiping marks or lapping marks

Colour stays permanently, non-fading, no peels or blisters

Economical use provides 3 times more coverage compared to shellac or varnish

OtterGel is unlike any liquid stain, available in 45 colors. It is very easy to apply, ni skilled labor is required. It is ideal for vertical wood surfaces. As a colored foundation compatible with all types of lacquers, P.U., N.C. and Acrylic, etc.

Recommended Use

Ideal for wood, fiberglass, metal and composite doors. Use on all interior wood surfaces, furniture, hardboard surfaces, molding, veneer, and wall paneling.

Specification

Appearance : Colored gel or natural

Matte

Application

Just apply, rub, wipe with a clean lint-free cloth (T-Shirt)

The surface should be free of finish wax or contaminates..

Use 280 grit sandpapers to sand a smooth surface..

Rub OtterGel with lint cloth or sponge spreading as far as possible to fill the wood pores evenly..

Only one coat is required. Wipe off excess gel with another clean lint-free cloth in the direction of the grain until smooth and even, color achieved and no more sanding required. Wait at least 1 hour to dry..

To dilute gel, mineral spirit or turpentine liquid can be added..

(For gloss appearance: apply 2 coats of Furniture Crystal Lacquer sealer and 2 coats Top Coat (Gloss or Matte Finishes) or Otter H20 based Polyurethane finish)

Result

It does not raise the grain of the wood.

Leave no wiping or lap marks.

No stirring - color very consistency from top to bottom.

Benefits/Features

Suitable for all hard and soft timber.

Topcoat in an hour, set to touch in 20 minutes.

Fade resistance, never peel or blister.

Economic to use - 3 times coverage than shellac or varnish..

Shelf Life: Minimum 2 years

Coverage

One application will cover 280 - 320 sq.ft.: Per liter or (26sqm to 29sqm) depending on the porosity of the surface..

Available in 1/3 quart, 1 quart, 1 gallon, 5 gallon.