•Inlet Pressure: 0.3~7.5bar
•Outlet pressure: 30mbar
•Working Tempreture: 0°C~50°C
•Capacity: 1.5Kg/h
•Innet connection: 20MM
•Outlet connection: 8MM
•Material: Zinc Alloy
•𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐧𝐠 𝐨𝐧 𝐭𝐡𝐞 𝐜𝐲𝐥𝐢𝐧𝐝𝐞𝐫:
•Ensure that the switch is pointing to the right at 3 o'clock (the "OFF" position)
•Push the button lock and place the regulator on the cylinder. Then, press the regulator firmly down and release.
•You should hear a "click" sound which means the regulator is securely latched
•* 𝑵𝒐𝒕𝒆: 𝑻𝒉𝒊𝒔 "𝒔𝒏𝒂𝒑 𝒐𝒏 𝒄𝒐𝒎𝒑𝒂𝒄𝒕" 𝒓𝒆𝒈𝒖𝒍𝒂𝒕𝒐𝒓 𝒊𝒔 𝒅𝒆𝒔𝒊𝒈𝒏𝒆𝒅 𝒂𝒔 𝒕𝒐 𝒑𝒓𝒆𝒗𝒆𝒏𝒕 𝒊𝒕 𝒇𝒓𝒐𝒎 𝒃𝒆𝒊𝒏𝒈 𝒇𝒊𝒕𝒕𝒆𝒅 𝒕𝒐 𝒕𝒉𝒆 𝒗𝒂𝒍𝒗𝒆. 𝑼𝒏𝒍𝒆𝒔𝒔 𝒕𝒉𝒆 𝒓𝒆𝒈𝒖𝒍𝒂𝒕𝒐𝒓 𝒉𝒂𝒏𝒅𝒍𝒆 𝒊𝒔 𝒊𝒏 𝒕𝒉𝒆 "𝑶𝑭𝑭" 𝒑𝒐𝒔𝒊𝒕𝒊𝒐𝒏. 𝑻𝒉𝒆𝒓𝒆𝒇𝒐𝒓𝒆, 𝒏𝒆𝒗𝒆𝒓 𝒂𝒕𝒕𝒆𝒎𝒑𝒕 𝒕𝒐 𝒎𝒐𝒖𝒏𝒕 𝒕𝒐 𝒐𝒓 𝒅𝒊𝒔𝒎𝒐𝒖𝒏𝒕 𝒊𝒕, 𝒘𝒉𝒆𝒏 𝒕𝒉𝒆 𝒉𝒂𝒏𝒅𝒍𝒆 𝒊𝒔 𝒏𝒐𝒕 𝒊𝒏 𝒕𝒉𝒂𝒕 𝒑𝒐𝒔𝒊𝒕𝒊𝒐𝒏
•𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐧𝐠 𝐈𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧:
•Once its correctly mounted on the valve, gas supply is possible by turning the knob anticlockwise so that it points upward (12 o'clock). The cylinder valve is now open and gas is "ON"
• To turn the gas "OFF", turn the switch clockwise until it points to the right (3 o'clock)
•𝐄𝐱𝐜𝐡𝐚𝐧𝐠𝐞 𝐨𝐟 𝐠𝐚𝐬 𝐜𝐲𝐥𝐢𝐧𝐝𝐞𝐫:
•Make sure all taps on the gas consuming appliance in the "OFF" position
•To disconnect the device from the cylinder, turn the knob clockwise to 3 o'clock (the "OFF" position)
•Press the button lock & pulling the gas regulator upward at the same time
•𝐂𝐚𝐮𝐭𝐢𝐨𝐧𝐬:
•Use only approved hose and hose clips to fix the regulator and appliance
•Do not disconnect from the gas cylinder while the appliance is still in use (alight) this action can cause serious fire accident
•In case of any leak DO NOT switch "ON" or "OFF" electric switches or light any matches or lighter, or any other source of flame
•* 𝑰𝒎𝒑𝒐𝒓𝒕𝒂𝒏𝒕: 𝑻𝒉𝒊𝒔 "𝒔𝒏𝒂𝒑 𝒐𝒏 𝒄𝒐𝒎𝒑𝒂𝒄𝒕" 𝒓𝒆𝒈𝒖𝒍𝒂𝒕𝒐𝒓 𝒊𝒔 𝒏𝒆𝒗𝒆𝒓 𝒕𝒐 𝒃𝒆 𝒍𝒆𝒇𝒕 𝒐𝒏 𝒕𝒉𝒆 𝒄𝒚𝒍𝒊𝒏𝒅𝒆𝒓 𝒘𝒊𝒕𝒉𝒐𝒖𝒕 𝒃𝒆𝒊𝒏𝒈 𝒄𝒐𝒏𝒏𝒆𝒄𝒕𝒆𝒅 𝒕𝒐 𝒕𝒉𝒆 𝒄𝒐𝒏𝒔𝒖𝒎𝒊𝒏𝒈 𝒂𝒑𝒑𝒍𝒊𝒂𝒏𝒄𝒆, 𝒂𝒔 𝒕𝒉𝒆 𝒕𝒆𝒂𝒓-𝒐𝒇𝒇 𝒑𝒓𝒐𝒐𝒇 𝒔𝒂𝒇𝒆𝒕𝒚 𝒊𝒔 𝒏𝒐𝒕 𝒕𝒐 𝒅𝒆𝒔𝒊𝒈𝒏𝒆𝒅 𝒕𝒐 𝒆𝒏𝒔𝒖𝒓𝒆 𝒕𝒉𝒆 𝒐𝒑𝒆𝒓𝒂𝒕𝒊𝒐𝒏 𝒐𝒇 𝒕𝒉𝒆 𝒄𝒚𝒍𝒊𝒏𝒅𝒆𝒓 𝒗𝒂𝒍𝒗𝒆
•𝐒𝐚𝐟𝐞𝐭𝐲 𝐏𝐫𝐞𝐜𝐚𝐮𝐭𝐢𝐨𝐧𝐬:
•Make sure the nozzle of the product and the nozzle on the regulator are the same dimension
•Always use certified hoses and it is protected from any leaks or damages.
•Do not try to repair, adjust, inspect the regulator or allow incompetent person to do so
•Never leave the gas stove unattended or try to detach the regulator when still used.
•Check for the leak using soapy water test, where bubbles will form on the leaked area.