Buaian Baby / Electronic Baby Cradle

Step1: First determine the total weight (baby + cradle + baby quilt)Each spring can load 2.7 kg5.95lbs, there are 7 springs in total, and the maximum load is 19 kg/41.88lbs. The total weight must be consistent with the number of springs Step 2: Install the spring Install the springs in the small holes at both ends, and hang the motor and the tripod downward Note: When hanging the spring, ensure the left and right balance. Step 3: Use the hook to hang the cradle on a rack or top plate, turn on the power, and then turn it on. The speed is adjusted to the appropriate speed according to the swing amplitude. The bottom of the cradle is about 60cm/23.62in away from the ground. Specification: Model:RF-289 Material: Plastic, Iron Timing Range: 60/120/180/240min Max. Load-bearing Capacity: 19kg/41.88lbs Load Capacity per Spring: 2.7kg/5.95lbs Package Included: 1*Baby Cradle Controller 1*Power Cord 7*Springs 2*Triangular Iron 3*S-shape Hooks 1*Rope 1*Chinese and English Manual Notes: 1.Do not tilt and pull the tensioner when fixing the wire. 2.The spring must be increased when the weight of the baby exceeds the weight that the spring can bear. 3.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.