Pembersih Stim Pegang Tangan, Bertekanan, Berbilang Permukaan, dengan 7 Aksesori, Skrin Sentuh Pintar, Boleh Dilaraskan 6 Tahap, Pengukus Pembersihan Dalam, Pembersih Kereta, Pemegang Mudah Alih, Stim Suhu Tinggi, Sesuai untuk Cuci Kereta

[6 speeds and 3 different brush heads] The multifunctional steam cleaner is equipped with 6 speeds and 3 different brush heads, which can be adjusted according to your specific cleaning needs and can handle a variety of cleaning tasks. Easily remove oil, dirt and grime to create a clean and comfortable living space

[Easy to store and move] The portable size and lightweight design make it easy to store and carry without taking up too much space. The handheld steam cleaner extension pole, long cable and non-slip handle design are perfect for mobile cleaning without making you tired

This is a multifunctional washing equipment specially designed for car washing, which is easy to operate, easy to install and rich in functions.

The device uses the working principle of instant heating, high temperature and high pressure. The device can realize the cleaning of range hoods and air conditioners without disassembly. The self-priming working principle can completely remove harmful substances such as scale, rust, algae, etc. in household appliances.

Note: Please use the relevant functions corresponding to the purchased model.

How to use this device

(1) Before cleaning, check whether the electrical equipment is operating normally and make preparations for the inspection before cleaning. (2) If you need to replace the cleaning spray gun head: a waterproof gasket must be added before connecting the spray gun copper nozzle with the steam gun head and the extension nozzle

(3) Turn on the power

(4) Turn off the cleaner. Unplug the power plug, drain the water in the water tank, wipe the water on the panel and nozzle, and ensure that the panel of the equipment host is clean.

(5) In winter, pay attention to prevent the machine from freezing.

Operation method

1. There is a movable joint on the air pipe of the spray gun. Aim at the outlet joint and rotate it clockwise until it is tight, and plug in the power cord

2. Turn the switch to "1" to turn on the power, hold the spray gun with your left hand, and the machine will start to spray steam about 30-50 seconds after the operating indicator light comes on. Turn the front frequency adjustment switch clockwise to increase the water vapor content, and counterclockwise to reduce the water vapor content.

3. At the same time, the water pump will make a clicking sound. Select the steam nozzle and brush according to the cleaning needs.

Precautions for the heating system

1. This machine can add an appropriate amount of corrosive cleaning agent, but it will damage the magnetic pump. Therefore, after cleaning, the crystals in the water pump should be removed immediately with clean water

2. When using cleaning powder, the spray gun can only work after the cleaning powder is completely dissolved to no particles, so as to avoid clogging or destructive damage to equipment components due to incomplete dissolution of the cleaning powder

3. When using steam, the water inlet temperature should not exceed 50℃ to avoid affecting the steam effect. 4. Place the device on a flat surface and ensure that it remains balanced during operation. 5. Do not spray on people, pets or the device during operation to avoid consequences.

6. When cleaning glass products, avoid uneven heating and cracking

Precautions for steam mode

1. The water tank must be filled with water before the device can be turned on to avoid dry burning of the device