Search
RM185.52
RM276.90Save up to 33%
(1291-1312) 5L Nippon Paint Interior Satin Glo Lustrous Pinks & Reds
Sold by HOCK LAI HARDWARE
Select options
Select
Shipping
From RM11.00
Est. delivery by May 17 - May 19
Specifications
HOCK LAI HARDWARE
3,146 items
Shop performance
Better than 78% of other shops
Ships within 2 days
81%
Responds within 24 hours
100%
About this product
BrandNIPPON PAINT
Product description
NOTE: The colours shown here are as close to actual paint colours as modern printing techniques allows. Due to different computer monitors/calibrations colours may vary slightly from the picture.
Satin Glo
Satin Glo is an acrylic-based paint with non-added lead and mercury which gives a luxury wall finish. It is a durable decorative finish specially formulated to provide a smooth mid sheen finish. It is washable and fungus resistant.
Features and benefits:
Long lasting- To clean your walls without losing the colour and lustre of the paint.Resistant against fungus- Inhibits the fungus or algae growth on the wall. Good scrub resistance- Maintain visual appearance without any significant wear after been cleaned over many time in the paint's intended life. Used as chalkboard paint- Provide more innovative ways in painting on chalkboard.Highly Washability- No worries as the paint are washable with good scrub resistance and makes your painted wall looks great.
Spreading rate per coat
Theoretical Coverage 9m²/l - 11m²/l
Actual coverage is dependent on substrate condition, application method,application condition and finishing appearance.
Recommended use:
For interior application, suitable for new buildings or repainting.
Substrate:
On Masonry, brick, plastering substrate and fibre board
Application data- Remarks
Handle with care. Stir well before use.
Application equipment / methods
By Brush / Roller : Dilute the paint with not more than 5% of water. Preferable not dilute for best performance.
Directions for use- Surface preparation
Remove all loose, defective paint or powdery residues, loose chalk, dust and foreign matter. Repair cracks, uneven surfaces with Multi-purpose Joint Compound or suitable fillers. Smoothen the putty / filler areas with sand paper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) Spot prime with Nippon Interior Wall Sealer.
Explore more from HOCK LAI HARDWARE
![HIGH QUALITY Safety Shoes Protective Steel Toe Cap Boots Anti-Smashing - 808 (BLACK / GREY)]()
4.8385soldRM49.50RM99.00![Safety Shoes Anti-Piercing Breathable Protective Steel Toe Cap - 1132 Black Grey]()
4.91050soldRM94.00RM112.50![OREX #900 High-Cut Safety Boot Shoes Leather Rubber High Cut]()
![6KV CHITED SAFETY SHOES BREATHABLE ANTI-SMASHING ANTI-PIERCING PROTECTIVE STEEL TOE CAP - 775 BEIGE]()
4.9336soldRM86.00RM120.00
No more products
Open TikTok