Dalam stok VORON Stealthburner / ERCF Toolhead PCB (V3 Rabbit) | XY-Endstop PCB | Z-Endstop PCB

Please contact us if you''d like to opt for self-pickup/by delivery services (Lalamove, Grab, etc.)

VORON Stealthburner Toolhead PCB

Product Description:

Designed and open-sourced by K. Hart aka Hartk, the Voron SteatlhBurner Toolhead PCB is the latest version available for the NEW StealthBurner Extruder and it makes wiring the extruder toolhead easier and more serviceable for maintenance.

- fully soldered and ready to use!

- micro-fit type connector for heater and thermistor (direct compatibility with Revo and Rapido)

- support for the new RGBW LEDs

- support for the ERCF filament sensor

- support for a plug-in external chamber themistor

- input for the new 5015 blower parts cooling fan

- input for the 4010 extruder fan

- input for the round pancake motor from LDO connected on the backside

- all connectors are now JST PH 2.00mm instead of JST XH of 2.54mm (we send them along with this product so you dont need to buy them separately.)

VORON Afterburner Toolhead PCB | ERCF (V3 Rabbit)

Product Description:

This is the latest version of the Tool-Head PCB for Voron Afterburner (V3.rabbit) a.k.a ERCF version which includes connections for the Enraged Rabbit Project multimaterial feeder. It has also solder jumpers on the back to select 24v or 5v for fans and probes. The fan and probe jumpers come as default set to 24v if you want a different voltage you will need to cut the trace and solder the other side. Except these changes, the PCB supports all the HartK Tool-Head PCB fetures of the standard V4 version.

Clean up the wiring harness for your Voron Afterburner by using this Tool-Head PCB (designed by hartk#1213).

The board design includes:

- One BAT85 Diode for the ABL probe

- An indicator LED to show when the hotend is active

- Several 2/3/4 JST XH pin headers for most components on the toolhead

- One 2 Pin Microfit 3.0 for the heater (incl. the fitting counterpart connector)

- One additional 2 Pin Microfit 3.0 and 3pin JST XH connector for support of the ERCF multimaterial feeder

- One 0805 pkg thermistor (chamber temperature sensor)

- One 14 Pin Microfit 3.0 for the main wiring loom back to the MCU (incl. the fitting counterpart connector)