SOARIN SR-3300 QUICK IRONING ELECTRIC IRON SMOOTH CERAMIC IRONING BASE PLATE

1 Set fabric dial at the desired fabric marking.

2. Make sure the voltage indicated on the iron meets your local voltage Allow iron to heat for 2 minutes on heel rest before ironing

3. The pilot lamps glows when the iron is switched on, and goes off when the iron is heated up to the temperature selected by the fabric dial. The lamp will remain off as long as the iron keeps the selected temperature and as the temperature decreases, the thermostat will start working, and the lamp will glow again. Theathermostat makes the pilot adjust automatically to the varying temperature as being selected by the fabric dial.

4. First iron chemical synthetic fabricat low temperature, and then as the temperature rises, iron wool, cotton and linen accordingly. The iron heats more quickly than it cools.

5. Allow time for the iron to heat when changing from a low temperature to a high one. Conversely, wait a while when changing to cooler setting.

HOW TO CHANGE THE CORD FOR LEFT-HAND IRONING

Please always ask your Dearina iron dealer to change the cord.

Take off the rear handle cover by removing the (+) screw.

Change the pilot lamp and cord to the opposite side.