About this product
Jenis WarantiWaranti Pembekal
Brandswiss thomas
Product description
1) JANGAN HIDUPKAN mesin sekiranya air masih belum keluar dari injap air panas.
2) Mesin hanya BOLEH DIHIDUPKAN selepas AIR DAPAT KELUAR DARI INJAP AIR PANAS
( Tangki air panas yang kosong tanpa air akan menjadi terlalu panas, dan menyebabkan elektrik trip)
3) Untuk air sejuk, sekiraya kapasiti air sejuk habis, air akan kembali ke suhu normal.
(Perlu tunggu 30 minit untuk proses penyejukkan semula air di dalam tangki tersebut)
• Table Top Water Dispenser
• Hot & Warm & Cold Water Dispenser
• Convenient & Save Time To Make Hot Drink
• Hot Water Tap with Safety Lock to Prevent Children from Scalding.
• Electronics Temperature Control
• High efficient heating element
• Contamination Resistance
4 filters (Korea Technology filter element)
1) Sediment Water Filter (removal of big particles/sand/rust)
2) Pre Carbon Block Water Filter (removal of chlorine, chemicals content in water)
3) UF Membrane Filter (removal of bacteria, viruses, and suspended solids particles as small as 0.01 microns)
4) Post Carbon Block Water Filter (improve aesthetic taste of water and further removes chemical contents in water)
ATTENTION: DO NOT switch on the machine before water tank in the dispenser is full .
Switch on the heater without water in water tank will cause the heater overheat & trigger auto-shutdown.
PERHATIAN: JANGAN hidupkan mesin sebelum tangki air dalam penapis air penuh.
Operasi mesin tanpa air dalam tangki air akan menyebabkan mesin terlampau panas dan berhenti sendiri.
1. Connect hose tube to the machine.
2. Open water to allow the water tank to be filled up.
3. For 1st time use, please open the warm water outlet valve to drain the blackish water until crystal clear water is seen (blackish water resulting from flushing of carbon filter for the very 1st time).
4. After the water tank is fully filled up, switch on the dispenser
(Green color switch for cold dispenser, Red color switch for hot dispenser)
1. 4 Filters (Sediment, Pre-Carbon, UF Membrane, Post-Carbon)
Hot Water : 85 – 95 Celsius (5.0 L/Hr)
Cold Water : 5 – 10 Celsius (2.0 L/Hr)
Warm Water : 25-30 Celsius
5. Chilling Type : R134A Compressor Cooling
7. Package Size : 330*360*540mm
8. Product Weight : 9.0 kg
1. 4 Filters (Sediment, Pre-Carbon, UF Membrane, Post-Carbon)
Hot Water : 85 – 95 Celsius (5.0 L/Hr)
Cold Water : 10 – 15 Celsius (0.8 L/Hr)
Warm Water : 25-30 Celsius
5. Chilling Type : Electric Cooling
7. Package Size : 330*330*540mm
8. Product Weight : 7.6 kg
• Water Dispenser with 4 Filters x 1 set
• Pipe Fittings x 1 unit, Water Filter x 1unit