Car Tire Repair Tool Set Vacuum Tire Motorcycle Electric Vehicle Emergency Rubber Strip Quick Glue Liquid Patch Kit for Puncture Fix

Function: Quick tire repair, safe and efficient

Features:

1. The tire repair strip has good flexibility, strong wear resistance, not easy to age, and strong air tightness

2. The screw drill adopts a clockwise thread design, which can easily drill into the tire hole, expand the punctured hole, and facilitate the rubber strip to enter the hole

3. The fork drill is made of high-strength steel, with a pointed fork design, which is convenient for carrying the rubber strip to plug the leak, convenient and practical

4. The handle adopts an ergonomic design, which is in line with human hand grasp, comfortable feel, simple and convenient operation, and quick tire repair

5. Has high-strength adhesive force. Once it is attached, it is not easy to peel off and has super strong adhesive force

Usage steps:

1. First remove foreign objects on the leaking tire, etc.

2. Use the screw drill to rotate back and forth and pierce the punctured point to expand the punctured hole

3. Prepare the repair Cut off a little of the tire rubber strip, clamp the rubber strip with a fork drill and apply glue

4. Insert the leaking hole into the previously drilled hole with force

5. Slowly rotate the fork drill to pull out the fork head

6. Use a knife to cut off the part of the rubber strip exposed on the outside of the tire, so that the entire tire repair process is completed

Precautions:

1. The direction of the hole must be found with a spiral needle to ensure that the direction and position of the rubber strip insertion are consistent with the direction of penetration, otherwise it will cause leakage. For example, if the direction of the hole is inclined 50 degrees with the tread, the spiral needle should also be inserted along this slope

2. After ensuring that the rubber strip has penetrated the tire sufficiently, rotate the fork needle to insert it into the hole, rotate the rubber strip one circle (360 degrees) and then pull it out to ensure that the rubber strip squeezes the hole and forms a rotating knot in the tire to avoid leakage

3. If it is a deeper inclined hole wound, the length of the rubber strip must be guaranteed to ensure that the rubber strip can penetrate the tire