About this product
- Jenis Waranti:Tiada Waranti
Product description
Product : High Pressure & Low Pressure Gas Regulator
Model : BGS-181 & BGS-182
Package Size: B181 (102mm x 112mm x 60mm)
B182 (63MM X 10mm x 64mm)
Package Weight: B181 (0.38KG)
High Pressure Gas Regulator(B181)
- Please read the instructions carefully before connecting the regulator.
- Only fit a new approved hose and secure the hose tightly with hose clips at both regulator and appliance.
- If the regulator is used outdoors, it must be protected from exposure to water, i.e: Rain, snow , etc..
- If u have any doubtsor difficulties, please contact your local gas dealler.
- Never disconnect the gas regulator from the cylinder valve if a burner remain alight.
- Never use a match or naked flame to search for leaks. Use soapy water or liquid detergent instead.
- For HIGH PRESSURE GAS REGULATOR(B181),do not use it on a LOW PRESSURE appliances.
#Connecting the regulator
- Ensure that the switch is pointing down wards. Place the regulator on the cylinder valve.
- Turn the switch clockwise so that it points to the left (the "OFF" position).
#Turning the gas "ON" and "OFF"
- Operates the switch clockwise so that it points upwards. The cylinder valve is now open and gan is "ON".
- To turn the gas "OFF" , turn the switch anti clockwise until it points to the left.
#Disconnecting the regulator.
- From the gas "OFF" position, operate the switch anti clockwise until it points downwards.
- The regulator can now be remove from the valve.
- Affix the plastic cap to the cylinder valve.