【COD】MODOFO Swimming Pool Vacuum Cleaner Floating Objects Suction Head Pool Fountain Vacuum Brush Cleaning Suction Head Cleaning Sludge Tool

55W- (power cord 10m corrugated pipe 7m + telescopic rod 3m + filter bag)

-Suction head: Triangle

installation instructions for small sewage suction machine

🌊Installation steps:

1. Open the cover of the pump, the long connector of the installation interface is connected to the pump port, and the short connector is connected to the side.

2. Install the triangular suction head into the water inlet of the pump.

3. Install a corrugated drain pipe at the pump outlet and tighten it with a round hoop.

4. Connect the suction head to the telescopic pole and insert the white snap.

5. Submerge the entire sewage suction machine and use it in a standard way.

6. The filter bag is connected at the outlet of the drainage pipe to recycle water.

🌊If the product cannot be installed or used after receipt, you can contact customer service for installation instructions and installation videos.

🌊Product precautions and routine maintenance:

1. Please use in a pool where the water depth is more than 35cm, i.e. the water depth should completely submerge the whole pump body.

2. Need to push gently when using, and need to handle carefully when retrieving.

3. Do not inhale the dirt on the wall, otherwise the interface will be cracked by gravity.

4. After sucking the dirt, please make sure to disassemble it and clean the attached garbage sediment.

Warning!!!

Don't on the pump when the pump not in the water ,will cause pump over heat and damage!!

In this case no warranty

This is BEST to suck some small dirty things, seaweed, bugs, etc

BEST for cleaning swimming pool, outdoor or indoor pond