RDY STOCK Hot Air Gun Heat Gun 2000W Heavy Duty Hand Hold High Temperature controlled Blower Shrink Gun Adjustable

Sticker Removal , Plastic Heat Shrink Tube, Remove Phone Screen Sticker,Bending PVC Pipe, Car Film, Shrink-fitting , Stripping paint etc...

Specifications:

Power Supply: 220-240V

Output: 2000W Heavy Duty

No-load Speed: 8000rpm

Frequency: 50-60Hz

Cable length: 1.6m

Plug Type : 3 Pin UK(MY) Plug

Item Size: Approx. 25 * 19.5 * 7cm / 9.8 * 7.7 * 2.8in

Item Weight: Approx. 660g / 23.3oz   

Package Size: Approx. 27.8 * 26.2 * 7.5cm / 11 * 10.3 * 3in

Package Weight: Approx. 960g / 33.9oz

Temperature value is displayed

Two levels of temperature control + The back cover is infinitely temperature controlled

Double heating wire

Temperature Range: 60°C-600°C

Air Flow:300-600L/MIN

Features:

High-quality heating elements ensure reliable and safe operation.

Built-in hang ring, convenient to hang on the wall. 

It can be applied in soldering pipes, welding PVC, drying, shrink-fitting, stripping paint, etc.

Attention:                                                 

1. Please keep the air outlet upward after finishing operation

2. It takes a little time to turn on / off the hot air gun because of the time-delay switch.

3. The hot air gun will NOT shut down until it cools down.

4. High temperature work can not be directly shut down, first adjust the temperature back to the lowest, blow out the residual temperature and then shut down, while prolonging the service life

5.Do not touch the hot nozzle when using or just after use.

6.Do not blow your work at one position for a long time to prevent distortion.

7.Boot time not too long, to avoid burn out the machine!Do not continuously use more than 10 minutes to prevent overheated.

8.Please minor children in the