MafababeREADYSTOCK eletronic baby cradle/ Buai elektrik/ BUAIAN ELEKTRIK/ BABY CRADLE IBABY Automatic Baby Cradle

All products are in Malaysia KL~ Ship within 48H~~ Product Name: Baby Electronic Cradle Controller-7 springs Spring Loaded Up to 20KG 1⃣The speed gear can be adjusted at will, according to the baby's weight and the number of springs, to adjust to the appropriate speed. 2⃣The machine comes with a song "Only Mother is Good in the World". The volume can be turned up or down. 3⃣4 gears: 60/120/180/240 minutes 4⃣This model is an upgraded model with 7 short springs, which is more suitable for iron frames. 5⃣12V external power supply, Malay plug. 6⃣ Install the spring quantity according to the baby's weight Steps for usage: 1: First of all, please determine the baby's weight. The number of springs used varies according to the baby's weight: 3 kg -5 kg (using 2 springs) 5 kg-7.5 kg (using 3 springs) 7.5 kg -10kg (using 4 springs) 10kg-13 kg (use 5 springs) 13kg-16 kg (use 6 springs) 16kg-20 kg (use 7 springs) 2: Put the baby and objects into the cradle, set the controller switch to the ON end, the speed control button to the O position, and then adjust the time selection knob to the rocking time you need. 3: :variable speed adjustable button along the direction of large scale, slow rotation, every turn half scale should be suspended for 8 seconds, observe whether shaking size is fit, transferred to the right. 4: after adjusted the machine, with things in the cradle (weight), dispensing with adjustable speed when using button again, just press the switch ON side. Note： Eight seconds after the cradle moved normally. Adjustable timer knob set automatic shutdown after the baby to sleep. When the load increase and decrease (or voltage instability or use spring) in shaking size is improper, should be adjustable speed knob. Note: 1: found in the process of shaking transmission line sends out a loud "snapped" sound speed control knob to reverse a little, to disappear "snapped" sound, sway size appropriate, transmission line can be durable. 2: the different weight load (18 kg) the machine speed control knob shall be adjusted in different scale to shake, the location of the speed control knob scale, the greater the doesn't have to shake. 3: boot after 8 seconds, if not be moved, you should check whether the spark plug and socket contact is good, the transmission line is out of the wheel stuck outside, whether the speed control knob to position. Is time to choose a knob speed indicator in ON end.