Product description
The second generation inverter compares to the first generation inverter:
Output voltage is more stable
Output waveform: corrected sine wave [closer to sine wave].
Input voltage :DC 10.5V~15V,
(When the battery voltage is lower than 10.5V, the inverter is low-voltage protection, when the battery voltage is higher than 15V, the inverter is high-voltage protection)
Output voltage: AC 110V /220V optional
Output frequency :220V 50Hz, 110V 60Hz.
Output waveform: modified sine wave.
Packing size: 8.6x3.933X 5.7inch 21.8*10*14.5cm
18W 5V 12V multi-functional solar charging panel
Product name: Digital tube solar controller
Voltage :DC 12V / 24V intelligent conversion
* Used to charge mobile phones, MP3s, tablets or other USB charging devices.
* You can put the panel in the sun and charge the device immediately.
* Very suitable for outdoor cycling, mountaineering, hiking, camping, traveling, etc.
1 * Solar panels 【Size1 :420* 28 * 0.25cm 、Size2 :540* 28 * 0.25cm】
-1.This is a modified sine wave inverter,NOT applicable for devices which work by built-in motor, hair dryers,air conditioners, coffee machine,water pump, induction cooker,refrigerators and microwave ovens etc.Make sure that the total rated power of the connected devices is ≤ 400W
-2.Tighten the Positive (+) and Negative (-) terminals when the car converter is in use
-3.If the converter is directly connected with the cigarette lighter. The highest out put power must be under 150W. If higher than 150W,we strongly recommend you using the Crocodile Clips to a battery ,because car cigarette lighter might not afford power over 150W.
-4.The car converter suitable for DC12V and Car ONLY, not applied for DC 24V and airplane
-5.Please do not leave the inverter in the ON position before car start.It's easy to damage the inverter before connected to the battery.The correct operation is connect to the battery first and then turn on the inverter switch
-6. It's normal for the inverter to become warm while you are using it.In order to get the best using results, please put the inverter on the flat surface The working place should meet the following criteria:
1. Keep dry, should not let the inverter contact the water or other liquids, keep the inverter away from moisture or water.
2. Cool environment, keep the temperature between 0 Celsius degrees and 40 Celsius degrees. Do not put the inverter next to heat vents or other devices. Try to keep the inverter not be shined directly by the sunshine.