About this product
Tempoh Waranti1 Bulan
Jenis WarantiWaranti Pembekal
BrandEvtor
Product description
Output waveform: Modified wave
AC output voltage: 220V/110V ±15%
AC output frequency: 50Hz/60Hz ±2Hz
Conversion efficiency: Maximum value>90%
Charging interface: External charger interface and external solar panel charging interface DC5521, 1 (built-in solar intelligent controller)
AC output socket: universal socket
DC output voltage: 1 USB output QC18W; 1 PD output maximum 20W;
LED light: LED high beam, low beam, high brightness, half light, flashing, LED light off 6 states Battery type: lead-acid battery/Lithium iron phosphate
Battery capacity: 12V 20AH/12.8V 76.8wH
Built-in solar panel specifications: 16V 18W/16V 12W
External solar panel: 16-20V maximum 20W (optional)
AC charger specifications: 15V 2A/15V 1A
AC charger charging time: After full discharge, the battery capacity reaches 80% after charging for 10/6 hours
LCD Display screen: battery capacity, battery voltage, charging status, discharging status Heat dissipation: automatic heat dissipation
Protection function: low voltage, overvoltage, overload, overtemperature, overcurrent short circuit
1. DC/AC is completely isolated
2. High frequency design, small size
3. Pure copper transformer, high efficiency, low no-load loss
4. Microprocessor, digital control, all-round protection
5. Built-in solar charger, intelligent charging and discharging management
6. AC output and DC output have independent power on and off functions
7. Comes with solar panel
️Environmental characteristics:
Operating environment temperature -10~40℃
Operating environment humidity 10~85%
Storage environment temperature -20~70℃ without condensation
Storage environment humidity 5~90%
Structural characteristics Plastic fireproof shell
Net weight (kg) ≈7.34kg/1.76kg
Product size D*W*H(mm) 353*108*258/253*84*214
1. After opening the package, please check whether the following accessories are complete.
2. The mobile power device should be placed in a well-ventilated place away from water, flammable gases, and corrosive substances.
4. Do not place it on its side, and keep the bottom and panel of the mobile power device uncovered.
5. The panel temperature and working environment temperature of the mobile power device should be kept between 0 and 40°C
6. If the mobile power device is disassembled and used at low temperatures, water condensation may occur. You must wait until the inside and outside of the device are completely dry before using it, otherwise there will be a risk of electric shock.