Serbuk Kuarza Oksida, 100g, untuk Penggilap Kaca, Menghilangkan Calar, Sesuai untuk Pembaikan Cermin Depan, untuk Kegunaan Kereta Car

Due to physical reactions, cerium oxide is the best polishing powder for glass scratches.

Easy to use, just mix the powder with water, then apply it on the glass polish it

Used to repair , mirrors, tables, windshields, slightly scratched glass tables,

The shower room, windshield, fish tank, even car headlights are all new.

Suggested instructions for using cerium oxide:

Supplies needed:

. Cerium oxide

2. Water (distilled water is recommended for some)

3. Polishing wheel

4. Electric drill

5. Small plastic bathtub (pint or quart size)

. Spray bottle

illustrate:

. Thoroughly clean the area where you will be working. Make sure there is no dirt or dirty glass, because once you start polishing, this will cause additional scratches.

2. We have prepared two small plastic buckets; quart or pint containers work well. Fill it half with water.

3. Put the polishing wheel in the water; let it wet completely, but do not for drip.

4. Put some cerium oxide in an empty bathtub add enough water to make a slurry (a fine paste-like mixture).

5. Place the padded polishing wheel on the electric drill immerse it in the cement slurry.

. Put the polishing wheel on your work area, if the scratches are very close, please use the small felt wheel window corner; keep the wheel moving up and down and in a circular motion. Make sure that the grout does not dry out, as this may cause your glass to overheat and crack. If your grout is drying, you can spray it with a spray bottle filled with water.

Specification:

Material: Rare earths materials

Color: Red

Product Weight: 100g/200g

The package includes:

1pc x cerium oxide powder

Note:

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!