[Nakamichi] 2-Way Speaker NSE1628 | Automotive Car Audio | Car Speaker | Component Speaker | Audio System | High End Speaker | Japan Innovative | Nakamichi Car Audio

•Type:Coaxial Speakers

•Size: 6.5” (16.6cm) 2-way

•Peak Power: 490W

•N-Power: 70W

•Frequency Response: 60-20k Hz

•Sensitivity (dB/W/m): 87±3dB

•Impedance: 4Ω

•Mounting Depth: >2.4” (61mm)

•Voice Coil: ASVΦ25.5mm

•Magnet Mass: 10 Oz (284g)

•Net Weight: Approx. 1.4kg

•Make sure that nothing obstructs around the mounting location of the rear tray.

•A hole for mounting may already be cut out of the inner panel of the rear tray. If so, you need to modify the board only.

•Ensure that the speaker terminals, frame or magnet do not interfere with any inner parts, (such as the window), etc. Also ensure that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, arm rests etc.

•Turn off the car ignition key.

•If the power is on, the click noise generated by the connection may damage the speakers.

•Cut out the mounting template from the packing box.

•Paste the template on the location selected for mounting the speaker.

•Mark the cut-off hole and the 4 bolt holes.

•Cut out the marked area and drill the bolt holes.

•Remove the grille net.

•Strip the speaker wires and connect them to the amplifier.

•Consult the diagram below. Be sure to connect corresponding terminals, i.e. "+" to "+" and "-" to "-". Connection with reversed polarity will degrade the quality of production.

•Connect the provided speaker cord to the speaker terminal while holding the lower portion of the speaker terminal.

•Mount on the speaker as shown below.

•Press and insert the edges of the grille net.

•The speaker grille can be mounted without the grille net, if you like.