Remote Control 1 Channel Receiver 433mhz Relay Switch Wireless Transmitter RF

1.【Great design】433Mhz RF wireless remote control switch.The working voltage is 12V.Stable and reliable performance with high reception sensitivity (> 97dBm).Strong signal can pass walls, floors, doors,board and so on.It can be controlled within 50 meters distance in open area.

2.【Easy to use】: Extremely easy to set up and reset. There are 3 operating mode(momentary/toggle/latched mode)

3.【More Flexibility】This receiver adopts 10A relay.There are 3 terminals(normally open, common, normally closed) for the wireless relay.

4.【Multiplayer control】One receiver can store about 20 transmitters.

5.【Secure System】The code of the chip is EV1527 learning code which is the most popular technology that making the remote control system more security.

6.【Quality Assurance】High-quality relay that can be used over 100,000 times.The remote control has a long service life. The battery is 2pcs CR2016.

7.【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets .You can remotely operate every device connect with the relay receiver through the remote control. such as, electric lock, Electromagnetic door,fan, lamp, lighting, ventilation device,water pump, signal transmission and DIY remote control switch.

※【Technical Parameter】

1. Receiver:

Input Power:DC 12V

Standby Current:

Max current:10 A

RF Frequency: 433Mhz

Remote storage:20pcs

Support remote type: EV1527 learning code

Working mode:Momentary, Toggle, Latch,Delay

Dimension of PCB: 35*30(mm)

2.remote control:

Power by 3V Battery(Battery included)

Working Frequency: 433Mhz

IC Chip: 1527 Learning Code

Button:2 Buttons

Size:60*30mm

※【Operating Mode】

You can match the Transmitter with the Relay Receiver Module in 3 modes.

Momentary Mode:

1. Press and hold one button, relay will turn on;

2. Release the button, this relay will turn off.

Toggle Mode:

1. Press button "A", relay will turn on;

2. Press button "A" again, this relay will turn off.

Latched mode:

1. Press button "A", relay will turn on;

2. Press button "B", this relay will turn off.

※【How to set up】

To program remote in momentary mode:

1. Press the learning button(on the Receiver) ONCE, light turns on;

2. Press one button on the remote control, light blinks. Succeed.

To program remote in toggle mode:

1. Press the learning button(on the Receiver) TWICE, light turns on;

2. Press one button on the remote control, light blinks. Succeed.

To program remote in latch mode:

1. Press the learning button(on the Receiver) 3 TIMES, light turns on;

2. Press button "A" on the remote control;

3. Press button "B" on the remote control, light blinks. Succeed.

To reset/clear all remotes:

1. Press and hold the learning button(on the Receiver);