About this product
Contains Dangerous Goods?Tidak
MCMC ApprovedTidak Berkaitan
Diluluskan oleh SIRIMTidak Berkaitan
Penggunaan Kuasa (W)0
Keadaan ProdukBaharu
Voltan Input (V)0
Jenis PalamTanpa Wayar
Dengan MagnetTidak
Kapasiti Bateri (mAh)0
Bateri Terbina DalamTidak
Bilangan Bateri0
Dengan BateriTidak
Jenis WarantiTiada Waranti
Product description
Suitable for water heater, automatic water dispenser, etc.
Lightweight, small, easy to install
With stainless steel axis in the wheel, abrasion resistant
Sealing ring would never leak water
All material meets RoHS standard
Water Flow Sensor Fluid Flowmeter Switch Counter 0.3-6L/min Meter
Consists of a plastic valve body, a water rotor, and a hall-effect sensor.
Speed changes with different rate of flow.
The hall-effect sensor outputs the corresponding pulse Signal.
Min. working voltage: DC 5V~12V
Max. working current: 15mA (DC 5V)
Working voltage range: DC 5V~18V
Humidity range: 35%~90%RH
Storage temperature: -25'C~80'C
Storage humidity: 25%~95% RH
Measuring range: 0.5~5L/min
Interior diameter: 3.6mm/0.142",external diameter:0.25 inch
Minimum rated working voltage: DC4.5 5V-24V
Maximum current: 15 mA(DC 5V)
Working voltage range: DC 5~18 V
Allow compression:Water pressure 0.8 Mpa below
F=constant * units of flow (L / min) * time (seconds).
Dimension: 2.28" x 1.38" x 1.06" (5.8 cm x 3.5 cm x 2.7 cm)
- Non-violent shock, and chemical erosion.
- Non-throwing or hitting.
- Prohibited dramatic impact and chemical erosion.
- Prohibited throw or hit.
- Vertical installation, inclination is no more than 5 degrees.
- Media temperature should not exceed 120 degree.
1 x Water flow sensor (14cm-cable)