PROTON GEN2 APM MANUAL GEN2 MANUAL NCP42 MANUAL GEN2 AUTO NCP93 AUTO RADIATOR FAN MOTOR

Radiator Fan Motor-Proton Gen2/Persona/Saga BLM FLX FL/Vios NCP42 NCP93/Altis ZZE122/21 Auto

Radiator Fan Motor-Proton Gen2/Persona/Saga BLM FLX/Toyota Vios NCP42 NCP93/Altis/Camry/ (Manual)

3 MONTHS WARRANTY (WAYER CANNOT CUT,IF CUT WAYER NO WARRANTY️️)

WHAT IS COOLING / RADIATOR FAN MOTOR?

Your vehicle's engine is constantly burning fuel and gets hot. The car’s cooling system is responsible for carrying heat away to the outside air. The cooling fan motor powers the cooling fan, which keeps the engine from overheating. The fan is located in the engine compartment, at the front or rear of the radiator. The fan cools the coolant as it passes through the radiator. The coolant flows through the entire engine and is responsible for absorbing the extra heat and thereby preventing the engine from overheating. The fan blows the air from the outside and passes it through the radiator. If the cooling fan motor and the fan stop working, the coolant will remain hot and cause the engine to overheat.

Keep in mind, when the cooling fan motor is replaced, the cooling fan blade should also be inspected. Anytime that maintenance is performed on the cooling system, the fan motor should be inspected.

WHEN THE COOLING / RADIATOR FAN MOTOR NEED TO REPLACE?

Car overheats.

Check Engine light may be on.

Cooling Fan fuse may be blown.

HOW IT'S DONE?

Scan the computer system for any diagnostic trouble codes.

Test fuses and relays.

Test for power and ground going to the fan.

Remove and replace the radiator fan motor.

Check for proper operation of fan.

RECOMMENDATION:

The cooling fan motor is an electrical motor that resides in a high temperature environment. At some point over time, it may fail. If you notice that the engine is overheating (see the temperature gauge in the dashboard), and you do not hear the fan(s) working get the cooling system inspected immediately.

Your mechanic should check the coolant and fill, if needed.

Follow the service maintenance schedule provided by the manufacturer to replac

Cooling Fan fuse may be blown.

HOW IT'S DONE?

Scan the computer system for any diagnostic trouble codes.

Test fuses and relays.

Test for power and ground going to the fan.

Remove and replace the radiator fan motor.

Check for proper operation of fan.

RECOMMENDATION:

The cooling fan motor is an electrical motor that resides in a high temperature environment. At some point over time, it may fail. If you notice that the engine is overheating (see the temperature gauge in the dashboard), and you do not hear the fan(s) working get the cooling system inspected immediately.