MASTERPAV Tinted Sealer *Colour Sealer for Concrete Imprint flooring*/Floor Color Coating (5L) TS2.5 Pengilat Jalan

 

AREA TO USE

 

MASTERPAV Tinted Sealer TS 2.5 is designed to use as a color staining to most concrete surfaces.

 

COLORS

 

MASTERPAV Tinted Sealer TS 2.5 is available in the M300 color hardener’s color range.

 

BENEFITS

 

• Designed into the desired effect.

 

• Easily applied.

 

• UV protected, will not fade in the sun.

 

• Can be used for old and fresh concrete surfaces.

 

COVERAGE RATES

 

The coverage rate is around 5 m2/liter depends on concrete substrates. A second coat may be necessary for the desired results.

 

SURFACE PREPARATION & APPLICATION INSTRUCTION

 

PREPARATION: For best results, concrete must be cured for a minimum of 28 days. The concrete should be free from contamination. It is recommended to power washed the concrete surface and allowed it to dry before application of Tinted Sealer TS2.5.

 

APPLICATION: Shake well the pail before use. Roll Tinted Sealer on the design floor. Avoid any puddling. Allow the tinted sealer to dry for at least six hours, and apply a second coat if needed for a particular appearance.

 

SEAL: Once the surface is fully dry, apply 1 coat of MASTERPAV Concrete Sealer.

 

PLEASE NOTE: It is always recommended to test the product in a small, inconspicuous area (on the same concrete substrates) for desired results prior to application. Coverage rates may vary depending on porosity, density, texture and etc.

 

PACKAGING