Watery Pinch silicone 1:1

 

2. Apply Vaselin in the inner wall of the mold to avoid flaws that appear with the mold.

 

3. Use silicone -specific color cream for coloring. The color cream can be placed on the wall of B glue and wait the cream fully dissolved with glue to prevent coloring phenomena.

 

4. After receiving the glue, it is recommended to prepare 1: 1, pour B glue first, and then pour in A glue is stirred evenly (the bottom of the cup and the wall of the cup must be scraped several times to avoid incomplete curing or poisoning due to residue).

 

5. The time temperature of about 25 degrees is about 4h-6h, and the lower the temperature, the lower the curing

 

6. Use warm water to add detergent and eliminate molding when removing the mold, which can be cleaned by Vaseline.

 

7, glue ratio A1: B1 feels tough, with resistance, fast back.

 

8. The ratio of glue A1: B1.3 feels soft, micro -resistance, and the rebound is slow.

 

9. The ratio of glue A1: B1.5 is super soft, and the rebound is slow.

 

10. Globe encounters water -based color cream, UV color essence, etc., which may cause poisoning ，Hardness, softness, gum or unsuitable phenomenon in the finished product

 

11. Adding color cream may cause changes in the hardness of the finished product and affect the feel.

 

12. Silicone cannot be harmonized with water, nitrogen -containing (n), sulfur (s), phosphorus (p), tin (n),Lead (PB), mercury (Hg) alcohol, etc., otherwise, poisoning, incomplete or even non -curing such as poisoning, adhesion, incomplete curing, or even non -curing.

 

13. Storage method: The glue should be sealed and stored in a dry and cool place.