Car Power Inverter 4000W/6000W/12000W Power Inverter Converter DC 12V to AC 220V Sine Wave Converter Portable Converter For Car Modification With Dual USB,Universal Output Sockets For Car /Camping Equipment

1️⃣New and high quality Car power inverter with 2 USB ports and AC outlet.

2️⃣Lightweight and compact, ideal for vacations, camping and business trips.

3️⃣It can be plugged into almost any 12V power outlet vehicle, providing charging opportunities anywhere.

4️⃣It can charge most phones and tablets simultaneously (max 4.1A), while the AC outlets are ideal for laptops, CPAP machines, game consoles, kindles, TVs, DVD players, lights, iPads, RVs, and more. other electronic devices.

5️⃣Built-in fuse to protect your device, safe charging design provides protection against "+"-" reverse connection, overheating, under and over voltage, short circuit, over charge and over charge.

【Specification】

-Name: Car power inverter

-Input voltage: DC 10.5V~15V,

(When the battery voltage is lower than 10.5V, the inverter is low -voltage protection, when the battery voltage is higher than 15V, the inverter high voltage protection)

-Output voltage : AC 220V/110V

-Output frequency is: 50Hz

-Peaks Power : 4000W-12000W

-Output waveform: Modified sine wave.

【Notice】

1. This is a modified sine wave inverter, not applicable for built-in motor-driven devices, hair dryers, air conditioners, coffee machines, water pumps, induction cookers,. Refrigerators and microwave ovens, etc.

2. Please tighten the positive (+) and negative (-) terminals when the car converter is in use.

3. If the converter is directly connected with the cigarette lighter. The highest output power must be less than 150W. If it exceeds 150W, we strongly recommend that you use the crocodile clips for a battery, because the car cigarette lighter may not have a power greater than 150W.

4. The car converter is suitable for DC12V and car only, not for DC 24V and airplane.

5. Please do not leave the inverter in ON position before starting the car. It is easy to damage the inverter before connecting to the battery. The correct operation is to connect to the battery first, and then turn on the inverter switch.

6. If you want to run an inductive load for a long time, it is recommended to purchase a pure sine wave inverter.