300W Hand Hold Hot Air Heat Gun Blower Shrink Gun MALAYSIA PLUG

SPECIFICATION:

Plug Type: UK plug

Material: Plastic

Size: 225*47mm/8.9*1.9inch, wire length 1m/39 inch

Rated Voltage:230V

Rated Power:300W

Power: 50-60Hz

Power type: AC power supply

Working temp:About 200 ℃

Air outlet diameter:

Type: Constant temperature, It can reach at about 200°C / 390°F within a few seconds

Feature:

High quality ABS anti-slip hand-hold part outside have high temperature resistance.

The temperature control device and micro-circulation cooling system inside will always keep you safe.

Heat up to 200°C/390°F quickly within few seconds.

Precautions:

1. Do not blow the object directly with the hot air gun at 90 degrees

2.Hot air gun air outlet away from heating items recommended distance 5-6CM

3.Hot air gun single use time should not be too long, usually 2-3 minutes, such as feeling the apparent temperature of the fuselage rises, please turn off the heat gun and wait for the cooling to use.

4.The temperature of the hot air gun can only reach about 200 °C, and it is impossible to disassemble the small iron piece,components and chip integrated circuits, etc.

Package Included:

1 x Hot Air Gun

1 x Manual