Product description
X'bond Construction Adhesive Sealant: is formulated to eliminated much of the nailing required for construction purposes.
This adhesive sealant provides a high strength, water resistant bond for a wide variety of construction materials including:-
9. Fabric Cement Sheeting
*Most suitable for use on foamed polystyrene and mirror backed tiles.
1. Underwater Applications Or Permanent Water Immersion
2. Polyethylene, Polypropylene, Nylontm Or Teflontm
3. Bonding Two Non-Porous Surfaces
4. Should Not Be Used Where Continuous Exposure To Elevated Temperature Will Occur
1. X’bond Construction Adhesive Will Bond In Approximately 7-24 Hours In Room Temperature.
2. The Curing Time Might Be Longer For Smoother Surfaces.
1. Apply Adhesive To One Surface And Bringing Substrate Together.
2. Press Firmly Over Entire Surface To Transfer Adhesive And Then Pull Both Surfaces Apart.
3. Allow To Tack Off For 3-5 Minutes.
4. Reposition And Press Firmly Together.
5. Contact Area Should Be Tapped With Hammer And Padded Block To Ensure Intimate Contact.
6. Maximum Bonding Will Be Taken For 12-72 Hours To Reach. Some Mechanical Fastening May Be Retained For This Period. Clean Off Excess Adhesive With Toluene Or Xylen