Penarik Pembaikan Kemek Kereta, Keluarkan Kemik, Cawan Sedut, dengan 18 Tab Tarik

Specifications: *Part Name: Car Dent Repair Puller *Material: Aluminium Alloy *Size: As the pictures shown *Color: Silver+ Blue * Fitment: Yes *OEM Number:/ *Fitment: T Bar Tools

Package Content:

1 x Hammer Dent Puller

18x Pulling Tabs

How to use: 1.Clean the dent with a clean wet cloth; 2.Mount the glue into the glue,pull the trigger to let the glue enter into the glue, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket.(Note: The larger the drawing gasket is, the larger the drawing force is);

4. Pull the trigger and apply the drawing gasket with extruded glue(The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres(Let the glue cool for about 8 minutes); 6. for Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth.