DPI Anchor High Heat Spray Paint 400ml ( Black ) High Temperature up to 600 Celsius / Cat Sembur / Tahan Panas / Ekzos

***DELIVERY TO WEST MALAYSIA ONLY***

- No delivery to East Malaysia (Sabah & Sarawak) as this is flammable goods.

- Also available at participating Hardware & Motor Shops in West Malaysia

 

ANCHOR HIGH HEAT

Anchor High Heat is an aerosol that works as a protective and decorative paint which is heat stable for temperatures up to 600C. Suitable for use on motorcycle exhausts , domestic stoves, furnace chimneys, industrial ovens. It can be used as a single coat, or two coats on bare ferrous metal surfaces.

 

Package included:

1 x DPI Anchor H2 High Heat Spray Paint 400ml (Black)

 

USAGE:

Make sure surface is dry & free of dust. Shake can thoroughly for 1min after mixing balls start to rattle.

Spray 30cm away from part back and forth to apply even layers of paint coat. Allow each coat to dry for 10mins.

Multiple coats give a better finishing than a single coat. Invert can after use and spray for 3s to clear valve.

 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

Anchor High Heat

Cat sembur tahan panas suhu 600 darjah celcius, sesuai untuk car ekzos motosikal, cerobong asap. Boleh dipakai sebagai coating tahan panas.

 

CARA PENGGUNAAN:

Pastikan permukaan adalah bersih dari habuk dan lembapan. Goncang dengan secukupnya selama 1 minit selepas

bola pembancuh mulai bergerak. Sembur pada jarak 30cm dengan gerakkan pergi dan balik untuk lapisan cat yang rata. Biarkan setiap lapisan kering selama 10 minit. Beberapa lapisan memberikan kemasan yang lebih baik daripada satu lapisan yang tebal. Terbalikkan botol/tin selepas guna dan sembur selama 3 saat untuk membersihkan injap penyembur.

 

IMPORTANT NOTICE:

Goods sold are returnable when the goods are found to be defective or unfit for their intended purpose unless the defects could have been detected upon reasonable examination of the goods by the buyer. It must be emphasized that, return of the defective goods must be done within a reasonable time.

 

#HighTemperatureSprayPaint #AnchorSprayPaint