433MHz Wireless Remote Control Relay Switch Receiver Module 5V 12V

•Operating voltage: DC 5V/12V

•Operating current: ≤ 8.5mA

•Operating temperature: -10 to 70°

•Receiver sensitivity: ≥-105dbm

•Output current: ≤ 10A

•Operating voltage: 6V

•Operating current: max 12mA

•Transmission speed: 50 to 60 kHz

•Transmission distance: 50m (tested with clear path)

•Battery: 2x CR2016 coin cell

•Operating voltage: 9-12V

•Operating current: max 12mA

•Transmission speed: 3 to 6kHz

•Transmission distance: 150-200m (tested with clear path)

•Battery: 12V 23A battery

•Inching mode: press the remote control the relay will connect, and then release the remote control to disconnect the relay

•Self-locking mode: press the remote control the relay will connect, and then press the remote control again to disconnect the relay

•Interlock mode: press the remote control key A to connect the relay and press the remote control key B to disconnect relay.

•Delay mode: press the remote control the relay will connect, release the remote control and start timing. After 5S, 10S and 15S (3 gears), the relay will be automatically closed.

•Press the code pairing button on the control panel once, and the LED indicator will flash once. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

•Press the code pairing button on the control panel twice, and the LED indicator will flash twice. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

•Press the code pairing button on the control panel three times, and the LED indicator will flash three times. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

•Press the code pairing button on the control panel four times, and the LED indicator will flash four times. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

•Press the code pairing button on the control panel five times, and the LED indicator will flash five times. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.