Product description
Suitable for : Plastic , Rubber , Ceramic , Metal and etc
READ INSTRUCTION BEFORE USING
1. Protect work area. Glue may damage febrics and furiture finishes.
2. Pierce tube with end of cap. When piercing, point away from face and don't squeeze tube. Screw on clear applicator with the cap.
3. Remove cap. Squeeze tube gently applying one drop per square inch. Too much glue or spreading glue will make a poor bond or no bond.
4. Parts to be glued must be clean and dry. Surfaces must be free from dust and grease and fit perfectly. Apply adhesive sparingly to one surface only.
5. Join the parts and press for 30 seconds. Allow to set for a few minutes.
6. Store in a cool, dry place. After use clean nozzle immediately with a cloth. Close properly. Store between 5 - 25°C: Avoid strong light and heat sources.
WARNING: IMMEDIATE BONDING OF THE SKIN, EYES OR MOUTH MAY OCCUR ON CONTACT. EYE IRRITANT. Contains: CYANOACRYLATE GLUE.
PRECAUTIONS: Avoid ingestion. Keep away from eyes.
KEEP OUT OF REACH OF CHILDREN.
FIRST AID TREATMENT: If eye contact occurs, rinse with tap water for 5 - 10 minutes. If irritation persists, seek medical care. If skin bonding occurs, soak in acetone-based nail polish remover or worm soapy water and carefully peel or roll skin apart (do not pull). Contact through clothing may cause skin burn. If spilled on clothing, flush with cold water. Avoid prolonged breathing of vapors. Use with adequate ventilation. for further health information, contact the nearest medical center.
1x Bossman 2units BEG172 Super Glue