[Free Lens Case] Complete Multi-Purpose Solution For Contact Lens (60ml / 100ml) Water

1) Wash and dry your hands prior to handling your lenses

2) Rub each side of the lens for 10 seconds

-Place 3 drops or more of complete MPS on one side of the lens surface

-Rub your lens gently from the centre to the edges for at least 10 seconds.

-(Never rub in circular motion, because it may tear the lens and not clean the outer edge surface)

-Repeat the rubbing steps for the other side of the lens

3) Rinse each side of the lens for 5 seconds

4) Soak for 6 hours

-Fill your contact lens case with fresh complete mps and allow it soak for a minimum of 6 hours

-When you insert your lenses:

a) Wash and dry your hands prior to handling your lenses

b) RINSE each side of your lenses for 5 seconds to remove any debris before re-inserting lenses

Indications:

-Cleans, stores, rinses, disinfects and re-wets soft contact lenses and also removes protein on soft contact lenses.

-Contains: Purified water, sodium choride, potassium chloride, sodium phosphate dibasic (heptahydrate), Poloxamer 237 0.05%, edetate disodium, sodium phosphate monobasic (monohydrate) and preserved with polyhexamethylene biguanide 0.0001%.

Product Details

-Storage: Store below 25 Degree Celsius.

Cautionary Instructions:

- DISCARD any remaining solution 90 days after opening.

- Keep bottle cap tightly closed when not in use.