Lightweight Hand Type Impulse Sealer Plastic Aluminium Packing Heat Hot Murah

Precautions: 1. This sealing machine should be handled with care to avoid falling at high altitude to avoid damage. 2. The heating wire is flat and can only use to seal the bags but cannot use to cut the bag. 3. Do not use the sealing machine when thunderstorms or in humid environments. 4. Always keep the sealing surface clean, avoid residues on the sealing surface because it can reduce the life of the heating wire and heat-resistant cloth. 5. Do not wipe the sealing surface with a damp cloth. 6. Can only clean the outer covering of the sealing machine. It is strictly forbidden to put the sealing machine into the water for cleaning. How to use: 1. Insert the power cord into a power socket, adjust the temperature (1 to 8) according to the thickness of the bag. It is recommended to gradually increase the high temperature from the low temperature. 2. Adjust the temperature until it can seal the bag. You do not need to seal the bag with high temperature at the beginning. 3. Please use low temperature to seal bags with thinner materials. It can extend the service life of a sealing machine. 4. Generally, use high temperature to seal bags with thicker materials. The higher the temperature, the service life of the sealing machine and the heating wire will be shortened. Then, place the plastic bag on the sealing surface. 5. Next, press the handle down, the circuit will automatically control the heating time and the indicator light is on. 6. When the indicator light is off, the power is automatically disconnected. 7. The sealing machine will not heat when the power is off. 8. Finally, wait about 1-2 seconds, release the handle and the indicator light will be off. The bag is sealed.