Ready stock Nippon Pylox Lazer spray tin 400cc/Solid/Fluorescent/chrome/Matt Black/Clear/Candy/Aerosol Spray Tin

PYLOX LAZER AEROSOL PAINT 400CC Pylox Lazer is a quick drying thermoplastic acrylic based aerosol paint, that can be used on a wide range of interior and exterior substrates. It is commonly used for spot repair, repainting of objects for reconditioning purpose. Product Features: • Quick dry • Excellent colour uniformity • Easy spray application Paint Type : Solvent based Product Type : Interior & Exterior Finishing : Gloss Recommended Substrate : Various Substrate Drying Time Touch Dry : 15 minutes Hard Dry : 1 hour Recoating Time : minimum 1 hours Drying time above is based on temperature 28 – 32 °C *Important Note: Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment temperature, environment humidity, number of coats applied. So drying time and recoating time provided is for guide only Dry Fil Thickness : 35-45 µm per coat No. of Coats : 2 – 3 coats Theoretical Coverage: 0.80 m2 per 400cc per coat (for dry film thickness of 40um) Practical Coverage: 0.64 m2 per 400cc per coat (for dry film thickness of 40um) (20% Loss Factor) Volume Solid: 18 – 25% Shelf Life: Up to 24 months in tight sealed container Specific Gravity: 0.92 – 1.15 kg/L Application Method Shake can thoroughly for at least 30 seconds before used. Hold container approximately 30 cm from object to be sprayed with opening in spray head pointed towards object. Press level down with index finger, keeping can in motion from side to side so that coating is deposited evenly. It is advisable to finish the whole can once start to use, to avoid the block of dry paint in the valve after use. Surface Preparation Surfaces should be clean, dry and free from oil, grease and contaminants before painting. For previously painted surfaces, remove all unstable paint film, loose chalk, dust and foreign matter. Substrate sanding is preferable especially on smooth Safety Precautions • Keep out of reach children or away from food and drink. • Ensure good ventilation during application and drying. • When applying paint, it is advisable to wear eye protection. • In case of contact with eye, rinse with plenty of water immediately and seek medical advice. • Remove splashes from skin by using soap or water. • Paint must always be stored in a cool place. • When transporting paint, care must be taken. Always keep container in a secure upright position. • Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations. surface.