About this product
Jenis WarantiTiada Waranti
Keadaan ProdukBaharu
Product description
· Safe use with Safety Valve
· Suitable for household, F&B restaurant, hawker and else [ thread size : 3/8" ]
· Suitable for industrial welding work - connect to twin welding hose [ thread size : 1/4" ]
· 100% fit to Malaysia Gas Cylinder
-Connection: ø20mm (Inlet) 3/8"
-Inlet Pressure: Max 0.6 Kpa (Max 6 bar)
-Outlet Pressure: 2.8 ~ 3.0 Kpa (28 ~ 30 mbar)
-Usage: For Normal Household Use Only
-Connection : Ø20mm (inlet) 3/8"
-Inlet Pressure : max 0.05- 1.0Kpa (0.5-10 bar)
-Outlet pressure : 0 ~0.2 kpa (0~ 2 bar)
-Rate Flow: 0-0.6 Kpa (0-6 bar)
-Usage: For F&B restaurant, hawker Use Only (High Pressure)
High Gas Regulator (HEAVY DUTY)
-Connection : Ø 1/4" (inlet)
-Inlet Pressure : max 0.05- 1.0Kpa (0.5-10 bar)
-Outlet pressure : 0 ~0.2 kpa (0~ 2 bar)
-Rate Flow: 0-0.6 Kpa (0-6 bar)
-Usage: For Industrial Use Only - example welding work (High Pressure Heavy Duty)
-Suitable: Twin welding hose use
· Place regulator onto the cylinder valve with the knob pointing downward
· To lock the device to the cylinder turn the knob clockwise to 9 o'clock position
· To supply the gas, turn the knob to 12 o'clock position
· To cut off gas, turn the knob anti-clockwise to 9 o'clock position
· To disconnect the device from the cylinder, turn the knob anti-clockwise to 6 o'clock position
· Use only approved hose and hose clips to fix the regulator and appliance
· Do not disconnect from the gas cylinder while the appliance is still in use (alight) this action can cause serious fire accident
· In case of any leak do not switch "ON" or "OFF" electric switches or light any matches or lighter, or any other source of flame
· Make sure the nozzle of the product and the nozzle on the regulator are the same dimension.
· Always use certified hoses and it is protected from any leaks or damages.
· Do not try to repair, adjust, inspect the regulator or allow incompetent person to do so
· Never leave the gas stove unattended or try to detach the regulator when still used.
· Check for the leak using soapy water test, where bubbles will form on the leaked area.
1. Due to manual measurement, there may be an error of 2~3cm/0.79-1.18in. The size is for reference only, please in kind prevail.
2. Due to the difference between different monitors, the picture may not reflect the actual color, we will appreciated your understanding.