XTITAN Drill Cordless Set Drill Battery Hand Drill Impact Drill Bateri Screwdriver Hammer Drill Bits With Light Electric Machine For Metal Steel/Wood/Wall

Color: Green/Red

Material: ABS+electronic components

Power supply type: lithium battery

Plug specification: British standard

Working mode: 3 modes (electric screwdriver, electric drill, impact drill)

Gear adjustment: 25 gear adjustment

Maximum torque: 75NM

No-load speed: 3500rpm/min

Drill mode: two speed

Handle structure: straight back handle

Chuck diameter: 10mm

Drilling Capacity: Wood, Aluminum, Steel

Drill bit clamping method: drill chuck

Maximum diameter of drill bit: 10mm

Drilling operation instructions:

Drill bit clamping:

1. The drill bit must be installed at the center of the three jaws of the chuck to avoid clamping misalignment and causing jumping.

2. The extension length of the drill bit should be as short as possible while complying with the drilling depth.

Drilling method:

1. When drilling holes with a diameter of 6mm and above, it is recommended to drill a pre-hole with a diameter of 3mm, and then perform secondary or multiple expansion holes to achieve the required hole diameter. Drilling the pre-hole can ensure the stability of the drill bit and drilling efficiency.

2. When drilling, try to keep the drill bit perpendicular to the workpiece. If the inclination angle is too large, the drill bit may break or the workpiece may be damaged.

3. When drilling, the electric drill pressure should be uniform. The electric drill should start slowly and accelerate slowly. This can effectively reduce the risk of personal injury and drill bit breakage.

4. When drilling deeper holes or large holes in metal parts, it is recommended to add cutting fluid for processing. This can improve drilling efficiency and prevent high-temperature damage to the drill bit.

Features:

1. Three-in-one function, with three different modes corresponding to different work needs.

2. Strong power, 25-speed torque adjustment, maximum torque 75NM, maximum speed 3500rpm/min.

3. Complete accessories, can be used in a variety of work scenarios, and can meet most daily needs.

4. Equipped with two large-capacity lithium batteries with power display, there is no need to worry about insufficient battery life.

5. Equipped with LED lighting, which automatically turns on when the machine starts, and can work normally in a dark environment.

Packing list:

Hand drill*1

Charger*1

Battery*1

Drill bit*6

Screwdriver*6

Socket adapter*1

Sleeve*9

Screwdriver adapter*1