Search
RM6.90 - 21.00
RM10.00 - 68.00Save up to 74%
Flash Sale
45cm/60cm/90cm/120cm White Privacy Tinted Window Film for Office Home WindowGlass Frosted glass sticker
Sold by Chicspace Store
12 sold
Select options
Select
Shipping
From RM4.90
Est. delivery by Apr 16 - Apr 19
Specifications
Chicspace Store
15 items
Shop performance
Better than 66% of other shops
Ships within 2 days
92%
Responds within 24 hours
100%
About this product
- Jenis Pelekat:Rata
- Ciri:Kalis air,Tahan Kotor,Mudah Dialihkan,Tahan Panas
- Kuantiti setiap Pek:1
- Guna:Sejagat
- Tetapan:Tingkap,Tandas,Pintu,Dapur
Product description
Malaysia Ready Stock!
đź‘Ť attention:
- Please purchase enough rolls at a time to ensure that they are from the same batch to avoid color difference.
- The wallpaper you receive may have some wrinkles on the top or both ends, but it will not affect the glue care of the surface.
Product name: Frosted self-adhesive glass film
Paste method: oily glue adsorption, no glue needed
Material: High-performance environmentally friendly PET film
UV protection: more than 80%
Uses: decoration, heat insulation, privacy, etc.
Scope of application: any smooth glass surface
đź‘Ť Specification:
Ordinary pure frosted, thickened pure frosted.
The difference between normal and thickened:
Normal thickness: Approximately 0.10mm
Thickened thickness: about 0.14mm
đź‘Ť size:
-100cm*45cm (length*width)
-100cm*60cm (length*width)
-100cm*90cm (length*width)
-100cm*120cm (length*width)
-300cm*45cm (length*width)
-300cm*60cm (length*width)
-300cm*90cm (length*width)
-300cm*120cm (length*width)
đź‘Ť Instructions:
1. Measure the size of the glass. When cutting the film, leave 2 to 3 cm on each side
2. Clean the glass
3. Use a watering can or self-made mineral water bottle to make holes, spray more water on the glass, the more the better (to ensure that the film loses its viscosity)
4. Tear one end of the film and fix it on the glass, and then tear off the low paper while sticking it. Spray water on the glued surface of the film to ensure that the film loses its viscosity temporarily.
5. Because there is water, you can adjust the position of the glass film at will and use a scraper to drive the water and bubbles out. If there are no bubbles, only the water is driven out.
6. Use a knife to cut off the extra side that was just left out, and then dry it with a rag to complete it.
đź‘Ť Notice:
Water spraying is a lubricating effect, which drives out bubbles along the water. If you do not spray water, the film will stick immediately, and there will be bubbles and wrinkles! !
If you stick it directly without spraying water, and then scrape it with a scraper, the film will break! !
The film will stick well when the water dries, so you can spray water with confidence! !
Videos for this product
684
Explore more from Chicspace Store
4.8
97361sold
RM1.50
RM2.50
4.7
27931sold
RM1.19
RM5.00
4.6
23018sold
RM1.29
RM5.00
No more products
Open TikTok