Refrigerator Start Relay 1 pin Relay Aksesori Peti Sejuk Ptc Starter Relay

Packing: 1 pc/pack

If your refrigerator stops producing cold air, there may be something wrong with the (positive temperature coefficient) relay, also known as the. The PTC relay starts the compressor inside the fridge to make cold air so your food stays cool. Luckily, the PTC relay is something you can easily check and replace yourself if you need to. After you access the relay and compressor on your fridge, use a multi-meter to test the ports to make sure it has a low resistance. If the relay still works, you may also need to check the compressor to make sure it’s still functioning.

How to test the start relay: -

1. Disconnect the refrigerator As you are going to work in the rear part, for your protection, the appliance should not be energized. This is a safety recommendation which must be followed when you are working with parts or equipment driven by electricity.

2. Remove the connectors of the relay Remove the protective cover of the compressor and remove the relay. With pliers, preferably needle-nose pliers, take the connector of the wire and remove the relay. Pay attention to not take the wire, but the connector. Note if there are signs of corrosion in the relay – if this is the case, opt to replace it.

3. Identify the model of the start relay There are different types of relays. The electrical unit of a refrigeration system is determined based on the voltage, frequency and operating envelope of the compressor.