[ORIGINAL] 70MAI DDPAI A800 A400 PRO A500 RC06 3M Electrostatic Sticker Double Tape Heat Resistant Adhesive Holder

The quality is same as the sticker came together with your camera.

❗️1SET= STICKER + DOUBLE SIDE TAPE FOR ONE CAMERA MODEL

(EITHER FRONT/ REAR DEPEND ON WHAT MODEL YOU CHOOSE)

❗️IF YOU WANT FRONT + REAR CAMERA,

PLEASE SELECT FRONT CAMERA X1SET AND REAR CAMERA X1SET

❗️TAKE NOTE (SILA BACA)--- READ ME

--- APPLY YOUR STICKER FIRST, BEFORE ATTACHING THE 3M TAPE/DASHCAM

--- STICKER MUST BE APPLIED AT EVEN/FLAT + CLEAN SURFACE (no dust/oil/polish)

--- PEEL OFF THE PROTECTIVE LAYER AND STICK THE ELECTROSTATIC STICKER, MAKE SURE NO BUBBLE/AIR AFTER COMPLETING

-- THEN ONLY APPLY YOUR DASHCAM TOGETHER WITH THE 3M TAPE ONTO THE STICKER

--- "DO NOT" USE YOUR HAND TO TOUCH/FEEL THE PROTECTIVE SIDE, THIS STICKER HAS NO STICKY/GLUE/GUM FEEL

70mai Electrostatic: IN STOCK✅

70mai sticker set for BASIC/1S/M300 : IN STOCK✅

70mai Sticker set for Pro/Lite: IN STOCK✅

70mai sticker set for A800/S- IN STOCK✅

70mai sticker set for A400- IN STOCK✅

70mai sticker set for A500/A500S- IN STOCK✅

70mai sticker set for RC06- IN STOCK✅

70mai sticker set for RC06- IN STOCK✅

70mai sticker set for M500- IN STOCK✅

70mai sticker set for X200 Omni- IN STOCK✅

DDPAI MINI/MINI2/2S- IN STOCK✅

DDPAI Z40/50 - IN STOCK✅

DDPAI N3- IN STOCK✅

DDPAI MINI3/3PRO - IN STOCK✅

3M Size

Basic/1S = 34 mm

Pro/Lite = 47 mm

A800/S = 57 mm

A500/S/A200 = 56 mm

RC06/09 = 29mm

M500/M510 = 49mm

X200 OMNI =35mm

Instructions (ENG) :

1-Remove your existing sticker film/3m tape

2- Wipe your wind screen/glass with dry/wet wipes

3- Make sure no dirt/dust/oil/fingerprints

4- Tear off the protective layer of the sticker film and stick on the surface

5- Apply the 3M tape on your device, attach to the sticker film

Instructions (BM) :

1- Buang pelekat/sticker dan gam 3M lama

2- Lap cermin/kaca dengan tisu basah atau kering

3- Pastikan kaca/cermin tiada habuk/minyak/cap jari

4- Pasangkan sticker dekat cermin kereta

5- Pasangkan gam 3M, dan pasangkan dashcam ke atas sticker

Suitable for:

1) 70Mai Dashcam /70Mai A800 / 70Mai Pro Dashcam / 70Mai Pro Plus / 70Mai Lite Dashcam / 70Mai GPS Module/70Mai A500/70Mai RC06

2) Other brand dashcam such as Xiaoyi, Yi , Mijia (original suction cup/holder required, apply electrostatic sticker before sticking the suction holder/cup to prevent damage to your tinted film)

What’s in the package：

1) 1 X Electrostatic Sticker

2) 1 X 3M Heat Resistance Adhesive Sticker (except if you buy just ONLY ELECTROSTATIC)